1078F Butterfly Valve Wafer Type PN 1.0 With Electrical Actuator

Product Description

Salient Features

• Design Standard IS 13095 / BS EN 593 (BS 5155).
• Wafer Type.
• Electrical Acuator Operated.
• S.G Iron construction.
• Stainless Steel (CF8 / CF8M*) Disc which is accurately guided between the two stems.
• Actuator is with position indicator and adjustable center stopper for both open and closed position.
• Compliant with B.M.S (Building Management System) and PLC (Programmable Logic Control).
• Inbuilt thermal protection and space heater
• IP 67 / IP 68 protection available for outdoor application.
• Inbuilt micro switch position feedback.
• Input Voltage 230 VAC/24 VDC* power supply.
• Integrally moulded rubber lining (EPDM / Nitrile / Neoprene* / Viton* / Silicon*) as per requirement which provides seating to the valve disc, as a primary seal to the stem and gasket joint with matching pipe flanges.
• Two Piece Stem design which is precisely guided between the PTFE / Bronze bushes.
• Compatible to sandwich between flanges as per BS 10 Table D, E, F,H, DIN, PN 10, PN 16, PN 25, PN 40, ASA 150, ASA 300, IS 778, IS 6392 Table 17 and IS 1538.
• For manual operation allen key is provided.
• Instrumental in Zero Water Waste installations.
• *Valves with Neoprene / Viton / Silicon lining, IS 3444 Gr.4 /CF8M (S.S 316) Disc and 24VDC Input Voltage can also be provided at nominal extra cost.
• PN 1.0

• Shell : 1.5 MPa
• Seat : 1.1 MPa
• Maximum Working Pressure : 1.0 MPa
• Maximum Working Temperature : 90C